STRETCHER MATTRESSES
The Slicker Mattress® is a lined, dual density foam cushion that is thermosealed inside an opaque teal, micro matte, vinyl cover. The mattress has many features that are designed to enhance infection control efforts. The cushion is completely encapsulated by a polyvinyl liner and a heavy outer vinyl cover to prevent contamination of the foam core.
The construction of the mattress minimizes corners and seams that might trap contaminants. That allows more thorough cleanup of blood and other fluids, providing additional protection for patients and staff from blood and fluid borne disease. For stretchers without top mounted rails, E.R. models are equipped with patented clear sheet tuck flaps that provide additional table top protection, particularly for attachment velcro which is difficult to clean. The flaps do not affect the ability to tuck sheets under the mattress.
The tough, durable vinyl covering extends the mattress life, withstanding a lot of wear and tear. The Slicker Mattress, in both the 3½ inch and 4½ inch versions, is built using a lower density top foam over a more dense bottom layer to increase comfort for the patient, but still remain durable in use. (It comes with a 1 year warranty.) The mattress is very flexible and will not interfere with normal stretcher use. All models are shipped with new self adhesive velcro to replace or reposition worn attachment velcro on the stretcher top.
Feature Summary
Built for comfort and durability using a lower density foam layer over a layer of higher density foam. The whole cushion is covered with a polyvinyl inner liner, and then enclosed in a heavy, tear resistant, flexible, opaque teal, micro matte vinyl cover. Top grade velcro completes the assembly. Built with thermosealed seams that channel fluid.
Radiology Slicker® Systems are clear, micro matte vinyl protective cover systems that are designed to enhance table sanitation and minimize table maintenance. The covers encapsulate the table cushion. In conjunction with the cover flap system, that simplifies cleanup, and allows more thorough cleaning and disinfection. Better cleaning results in a reduction of contaminant buildups in hard to clean areas. Exposure to blood and fluid borne disease is reduced for the patient, the technician, and for cleaning and maintenance personnel. The fluid control flaps, used on Slicker systems, keep fluids and contaminants from penetrating into the electromechanical components of the table. Table maintenance downtime and costs are substantially reduced. The Slicker’s flaps, and skirts (where used), help to protect table rails and edges from wear and tear. A Slicker Cushion® is a lined foam cushion that is permanently welded inside a Slicker cover to further prevent cushion penetration by fluids and contaminants. All Slicker covers and cushions are easy to install and do not affect normal table usage.
- Radiology Slicker Feature Summary
Each system is built using heavy, clear, micro matte vinyl, and top grade velcro to exactly fit the specified table. Expected life is between 6 months and 2 years depending on usage.
Thermosealed seams and flaps deflect fluids, substantially reducing contaminant penetration into the cushion and table. Contaminants are retained on the table top or shunted to the floor. The result is faster, more thorough cleanup, and reduced contaminant buildup.
Designed for easy cleanup and disinfection using standard bleach solutions.
Reduces table maintenance, and general wear and tear, including table rail and edge impact damage from stretchers. This protection is further increased for models with skirts.
Systems use existing table velcro to anchor the cover- cushion combination. The custom vinyl used to build the systems resists tears, and is formulated to minimize radiologic interference. The vinyl also meets ISO 10993 biosensitivity requirements.
All products are completely latex free.
All Slicker cover sets include the main cushion cover and, on CT models, a catheter bag hanger. In addition, sets may contain an extender cover, skirts, gantry deflector, and supplementary table velcro. Skirts are sold separately for some tables. Slicker Cushion sets include complete thermosealed cushions in place of the main and extender covers. The cushion peripheral components are the same as those for the corresponding Slicker cover set.
|
Cross Section of the E.R. Mattress
contaminants from penetrating under the mattress onto the stretcher top. The result is faster, more thorough cleanups, and a reduction in contaminant buildup in areas like the attachment velcro. The Slicker Mattress is designed for easy cleanup using standard cleaning solutions. Shorter cleanup time returns the stretcher to service faster. New table velcro is supplied with the mattress to insure secure mattress to stretcher adhesion. Custom vinyl is used in the Slicker Mattress. It is the same formulation that is used for the Radiology Slicker series to avoid interference with radiologic studies.
How the CT Slicker Works
A
The patient is positioned on the CT Slicker (teal) and cushion (blue) combination. The Slicker flaps cover the gap between the cradle and table rails to keep foreign matter from entering and contaminating the table interior.
B
When the table security belt is fastened, the Slicker flaps extend up the patient’s sides to form a “tub” that retains fluids (red) and other contaminants inside the cover and away from your table top.
C
When the security belt is released, fluids and contaminants either remain on the Slicker cover or run off the cover and are shunted directly to the floor by the Slicker’s flap system for easy, more thorough clean up. (On a few machines, if scans are run with the flaps in the down position with no security belt, artifact may result.)
Each Slicker and Slicker Cushion set is designed for a
specific table. Please see the accompanying part list to
find your model.
For further information on all Medical
products, please contact:
Sales Department
ER. OR. Medical
17 Corang Rd
Westleigh NSW 2120
.Phone: 0419253576
Fax: 0285805193
|
